Free tool
LED power & electricity calculator.
Peak and average load, supply type, MCB and cable size, and what the screen will add to your EB bill.
Your screen
Commercial tariffs are often ₹8–₹10 a unit. Check your EB bill.
Results
Peak vs average power
Peak is the screen showing full white at full brightness. Real content is much darker, so average use is about a third of peak.
Size the supply, breaker and cable for peak. Work out running cost from average. Outdoor screens with an ambient light sensor dim at night, which lowers running cost further.
Read the full guide: How much electricity does an LED wall really use? →
How much power does an LED wall use?
Modern indoor LED walls draw about 450–600 W per square metre at full white and roughly a third of that on typical video. Outdoor screens are brighter and draw about 700–900 W per square metre at peak.
Do I need a 3-phase supply for an LED screen?
Usually when the peak load goes above about 5 kW (roughly 9 m² indoor or 6 m² outdoor). Smaller screens run on single-phase 230 V.
What MCB size do I need for an LED display?
Size the breaker at about 1.25 times the peak current, then round up to the next standard rating. A licensed electrician must confirm it with the cable length and installation method.
How much will the electricity bill be?
Multiply the average power in kW by the hours per day, days per month and your tariff per unit. The calculator does this for you; change the tariff to match your EB bill.
