Blog ·

What pixel pitch do you need? A simple rule

Close-up of an LED video wall module showing the RGB LEDs and the gap between them

The right pixel pitch for an LED video wall depends mainly on one thing: how close people will stand to the screen. Get that distance right and the rest of the choice becomes easy.

Pixel pitch is the distance, in millimetres, from the centre of one LED pixel to the centre of the next. A smaller number means pixels are packed tighter, so the picture stays sharp when viewed up close. Choose a pitch that is too coarse for a showroom wall and customers will see dots instead of a picture. Choose a very fine pitch for a hoarding that people see from across the road and you pay for detail nobody can see.

The simple rule: 1 mm of pitch for every metre of distance

A widely used rule of thumb is that each millimetre of pixel pitch needs about one metre of viewing distance. That metre figure is the closest comfortable distance; anyone standing further back sees an even smoother picture.

  • P2.5 looks sharp from about 2.5 m (8 ft) onwards.

  • P4 looks sharp from about 4 m (13 ft) onwards.

  • P10 looks sharp from about 10 m (33 ft) onwards.

Stand closer than that and individual dots start to show. Text-heavy content such as menus, notices or share prices is less forgiving than video, so if your screen will mostly show text, lean one step finer.

The same saree image on a fine P2.5 LED screen and a coarse P10 LED screen, both seen from 1 metre
Same picture, same 1 metre viewing distance: fine pitch on the left, coarse pitch on the right.

Why finer is not always better

A finer pitch packs more LEDs into every square foot, so it costs more per square foot. It also needs more processing power to drive the extra pixels. That money is well spent on a boardroom wall people sit 2 m from. It is wasted on a terrace hoarding that is only ever seen from the road, because at that distance a P10 and a P4 look the same to the eye.

So the goal is not the finest pitch you can afford. It is the coarsest pitch that still looks sharp from where your audience actually stands.

Indoor and outdoor screens are different products

Indoors, lighting is controlled and people walk right up to the screen, so indoor walls use fine pitches. Outdoor screens fight direct sunlight, monsoon rain, dust and summer heat. They are built much brighter, in weather-rated cabinets, and are usually seen from further away, so coarser pitches are normal.

An indoor screen should never be installed outdoors, even under a shade. It is not bright enough for daylight and not sealed against rain and humidity.

Quick guide: pitch, distance and typical use

Pixel pitchClosest comfortable distanceTypical useWhere
P1.5 – P25 – 7 ft (1.5 – 2 m)Boardrooms, control rooms, premium showroomsIndoor
P2.5 – P38 – 10 ft (2.5 – 3 m)Showrooms, school and college auditoriums, hotel and mall lobbiesIndoor
P2.5 – P48 – 13 ft (2.5 – 4 m)Shop name boards and standees seen from the footpathOutdoor
P5 – P6.616 – 22 ft (5 – 7 m)Building fronts, mall courtyards, petrol bunksOutdoor
P1033 ft (10 m) and beyondRoadside and terrace hoardings, grounds and stadiumsOutdoor

A starting point, not a fixed rule. The final choice also depends on content, budget and screen size.

A worked example

Say you run a textile showroom in Tiruppur and want a 10 ft × 6 ft LED wall behind the billing counter. Customers stand about 8 to 10 ft away. By the rule, anything from P2.5 to P3 will look sharp, and P2.5 gives more room for close-up product videos.

Now say the same showroom wants a screen on the building front, 15 ft above the road, seen from across the street at about 40 ft. Here P6.6 or P10 is enough, and the money saved on pitch is better spent on brightness and a strong structure.

Try it yourself: enter your wall size and pitch in our free LED wall size and resolution calculator. It shows how many modules fit, the exact screen size and the pixel resolution you will get.

Pitch decides resolution, not just sharpness

LED walls are built by joining modules into cabinets, so the final size moves in module steps, not any size you like. The pitch then decides how many pixels fit in that size. A 10 ft wide wall has roughly four times as many pixels across at P2.5 as at P10.

That matters for content. A video made for a large pixel count may need resizing for a coarse-pitch screen, and fine text that reads well on P2.5 can turn into a blur on P10. Check the resolution before you design content. The aspect ratio calculator helps you size videos and images to fit.

Browse fine-pitch options on our indoor LED display page, or weather-rated builds for shop fronts and hoardings on our outdoor LED display page.

Quick checklist

  • Measure the closest point where people will actually stand or sit.

  • Convert that distance to metres; that number is roughly the largest pitch you should consider.

  • Mostly text on screen? Go one step finer.

  • Decide if the site is indoor or fully outdoor. Do not put an indoor screen outdoors.

  • Check the size and resolution in the size calculator, then compare quotes with our LED wall spec guide.

  • Ask for a site survey to confirm mounting, structure and power.

Frequently asked questions

What happens if I choose a pitch that is too coarse for my shop?

If people stand closer than the pitch allows, they see separate dots instead of a smooth picture, and small text becomes hard to read. The screen still works, but it looks cheap up close.

Is a smaller pixel pitch always better?

No. A finer pitch costs more per square foot. If your audience is far away, they cannot see the extra detail, so a coarser pitch gives the same result for less.

Does a finer pitch use more electricity?

Not by itself. Power depends more on brightness and screen size. Outdoor screens run much brighter, so they usually use more power per square foot than indoor ones. Our LED power calculator estimates the load and monthly EB cost.

Can you install outdoor screens during the monsoon?

Yes, our own technicians install across Tamil Nadu, Kerala and Puducherry, and we plan outdoor work around the weather. Outdoor screens use weather-rated cabinets, and the structure should be designed for wind load. The weight and wind load calculator gives a first estimate.

How long does it take after I place the order?

Production takes about 10 days from order, plus shipping to your location. Our team then installs it and trains your staff to run the content.

Not sure which pitch fits your site?

Tell us the wall size, the location and how far your viewers will be, and we will recommend the right pitch. We reply within one working day, and our own technicians handle mounting, wiring and commissioning across Tamil Nadu, Kerala and Puducherry. Ask for a quote below.

Phone: 94038 90883 · Email: sales@manyuinternational.com · WhatsApp: +91 74068 35576

Talk to us about your display

We reply within one working day. Prefer to talk? Call or WhatsApp us.

Loading the form…

Planning a display? Let's light it up.